Global Market Size, Forecast, and Trend Highlights Over 2025-2037
Automotive Purge Valve Market size was valued at USD 1.04 trillion in 2024 and is projected to reach USD 1.94 trillion by the end of 2037, rising at a CAGR of 4.9% during the forecast period, i.e., 2025-2037. In 2025, the industry size of automotive purge valve is assessed at USD 1.09 trillion.
The primary driver of the automotive purge valve market is rising strict emission regulations developed by standard authorities and pollution control boards. The growth is dependent on increasing focus on reducing vehicular emissions to prevent global warming and improve air quality, which would turn into a green future. Governments worldwide are enforcing stricter emission norms to reduce air pollution. Regulatory bodies such as the Environmental Protection Agency (EPA), Euro 6, and Bharat Stage (BS-VI) require vehicles to have efficient evaporative emission control systems, boosting demand for purge valves. For instance, in March 2024, the U.S. Environmental Protection Agency (EPA) finalized the multi-pollutant emissions standards for the model year 2027 and later light and medium-duty vehicles. These regulations have set new, stricter standards for greenhouse gas emissions and criteria for pollutant emissions. Further, this rule is expected to avoid 7.2 billion tons of CO2 emissions by 2055.
Moreover, the rising global vehicle production, especially in China, India, and Southeast Asia, is fueling demand for the automotive purge valve. The growing automotive sales, including internal combustion engines (ICE) and hybrid vehicles, require EVAP systems with purge valves. For instance, the market for new energy vehicles encompassing electric and plug-in hybrid cars grew by 10.5% and accounted for 41.2% of total sales. Further, it is expected that new electric vehicles (NEVs) will comprise 57% of total car sales in 2025.
Automotive Purge Valve Market: Growth Drivers and Challenges
Growth Drivers
- Growth of hybrid and gasoline vehicles: Hybrid and gasoline vehicles dominate the automotive purge valve market and require efficient EVAP systems. The U.S Department of Energy 2024 Report suggests that Hybrid electric vehicle sales experienced rapid growth in 2023, increasing by 53% from 2022 and achieving nearly 1.2 million vehicle sales. Hybrid electric vehicles are fueled with gasoline and have a battery for capturing and reusing energy that would otherwise be lost through braking, which gives them better fuel economy and helps in lowering emissions as compared to conventional vehicles. The rising adoption of plug-in electric vehicles and hybrid electric vehicles enables consumers toward decarbonization. Additionally, increasing demand for fuel efficiency also drives the demand for automotive purge valves. As consumers are seeking better fuel economy, purge valves help to recycle fuel vapors back into the engine for combustion. This leads to lower fuel wastage and improved mileage, which makes vehicles more efficient.
- Advancements in automotive electronics: The adoption of electronic purge valves with onboard diagnostics (OBD) and smart sensors is improving engine efficiency and emission control. Hence, automakers are integrating better-performing solenoid purge valves for precise control of fuel vapors. This enables precise adjustments to the purge valve operation based on driving conditions and environmental factors, resulting in optimized fuel vapor management. The advancements in automotive purge valves are expected to develop cleaner vehicles, leading to an atmosphere with reduced hydrocarbon emissions. According to the International Council on Clean Transportation Report, the net cost of cleaner vehicles and fuels in 2025 is expected to be USD 14.5 billion across the world.
Challenges
- Shift toward electric vehicles: EVs do not use purge valves since they lack internal combustion engines and fuel systems. As EV adoption rises, demand for purge valves may decline in the long run. Therefore, automakers investing heavily in battery technology could divert R&D funding away from fuel system components like purge valves.
- Fluctuating raw material prices: Purge valves use materials such as plastics, metals, and electronic components, which are subject to price volatility. Further, supply chain disruptions, such as semiconductor shortages, can increase costs and delays in production.
Automotive Purge Valve Market: Key Insights
|
Base Year |
2024 |
|
Forecast Year |
2025-2037 |
|
CAGR |
4.9% |
|
Base Year Market Size (2024) |
USD 1.04 trillion |
|
Forecast Year Market Size (2037) |
USD 1.94 trillion |
|
Regional Scope |
|
Automotive Purge Valve Segmentation
Vehicle Type (Passenger Cars, Light Commercial Vehicles, and Heavy Commercial Vehicles)
Passenger cars segment is projected to dominate over 64% automotive purge valve market share by 2037, owing to the rising demand for passenger vehicles with efficient evaporative emission control systems (EVAP) and stringent emission regulations. Passenger cars equipped with internal combustion engines and hybrid powertrains require EVAP with purge valves to manage fuel vapor emissions and improve fuel efficiency. The European Automobile Manufacturer’s Association 2023 report states that China leads the passenger vehicle production sector by producing 34% of the 69 million cars that are manufactured worldwide each year, followed by Europe (19%) and North America (15%).
Valve Type (Solenoid Vent Valve, Mechanical Vent Valve, and Diaphragm Vent Valve)
The solenoid vent valve segment is expected to dominate the automotive purge valve market throughout 2037. The solenoid valve plays a crucial role in the market, particularly within the evaporative emission control systems. This valve regulates the flow of fuel vapors from the charcoal canister to the engine, ensuring that excess vapors do not escape into the atmosphere. By using an electromagnetic solenoid mechanism, it opens and closes precisely based on signals from the vehicle engine control unit (ECU).
Our in-depth analysis of the global automotive purge valve market includes the following segments:
|
Vehicle Type |
|
|
Valve Type |
|
|
Fuel |
|
|
End Use |
|
|
Application |
|
Want to customize this research report as per your requirements? Our research team will cover the information you require to help you take effective business decisions.
Customize this ReportAutomotive Purge Valve Industry - Regional Scope
North America Market Analysis
By the end of 2037, North America automotive purge valve market is set to account for more than 38% revenue share. The market is driven by strict emission regulations enforced by the Environmental Protection Agency (EPA) and the California Air Resources Board (CARB). The EPA’s Greenhouse Gas emission standards for light-duty vehicles require automakers to reduce CO2 emissions per mile.
The automotive purge valve market in the U.S. is expanding due to the increasing adoption of hybrid and fuel-efficient vehicles amid rising fuel economy standards. The strict EPA and state-level emission regulations, including California’s ZEV program, are pushing automakers to enhance evaporative emission control systems. Moreover, leading manufacturers are innovating purge valve technologies to improve performance and compliance. For instance, in June 2023, Eaton announced the launch of a 3-in-1 battery pack vent valve for EV batteries. The valve is uniquely positioned to deliver three unique functions in one go, including a battery case leak-check mechanism along with active and passive venting to provide relief from over-pressuring a vehicle’s battery pack.
The automotive purge valve market in Canada is growing due to the country’s commitment to reduce vehicle emissions under regulations such as Canada’s Tier 3 Vehicle and Fuel Standards. The International Council on Clean Transportation states that by 2030, the Tier 3 emission standards aim to reduce on-road vehicle fleet emissions and smog-forming pollutants by 80%. Thus, the increasing demand for fuel-efficient and hybrid vehicles is encouraging automakers to adopt advanced evaporative emission control systems. With a strong presence of aftermarket suppliers and OEMs, companies are investing in high-performance electronic purge valves to meet compliance needs. For instance, in June 2024, Bosch released 87 new automotive aftermarket parts covering about 318 million operational vehicles in North America. Bosch launched a new canister purge valve covering more than 500,000 European makers and models in the US and Canada. This valve enables correct function and calibration to ensure trouble-free operation and comply with emission regulations.
Asia Pacific Market Analysis
Asia Pacific automotive purge valve market is expected to witness rapid growth through 2037 due to rapid vehicle production in China, India, and Southeast Asia. Stricter emission regulations, including China 6 and Bharat Stage VI, are driving automakers to integrate advanced EVAP systems. The rising demand for affordable fuel-efficient cars is also helping manufacturers to develop cost-effective, high-performance purge valves.
The automotive purge valve market in China is growing due to the implementation of China 6 emission standards. These regulations mandate advanced evaporative emission control systems in vehicles, leading to increased demand for high-performance purge valves. The growth is further supported by China’s dominance in passenger car and hybrid vehicle production, and rising urbanization and car ownership rates. According to the International Trade Administration report, China leads the vehicle market in terms of annual sales and manufacturing. The domestic vehicle production in China is expected to reach 35 million vehicles by 2025. Thus, automakers are focusing on producing fuel-efficient solutions to meet consumer demand and fulfill emission standards.
The automotive purge valve market in India is rising due to the implementation of Bharat Stage VI emission norms which mandate stricter evaporative emission control systems. The rapid expansion of automobile manufacturing driven by rising passenger vehicle demand is increasing the need for efficient purge valves. Thus, automobile manufacturers in India are aiming to develop cost effective, durable solutions for both domestic and export markets. According to the Society of Indian Automobile Manufacturers Report 2024, the automobile industry produced a total of 2.84 Crore units of vehicles including passenger vehicles, commercial vehicles, three-wheelers, two-wheelers, and quadricycles in 2023-24 as compared to 2.59 Crore units in the year 2022-23. Therefore, the rise in the production of vehicles denotes the increased use of automotive purge valves, as these are highly essential.
Companies Dominating the Automotive Purge Valve Market
- Continental AG
- Company Overview
- Business Strategy
- Key Product Offerings
- Financial Performance
- Key Performance Indicators
- Risk Analysis
- Recent Development
- Regional Presence
- SWOT Analysis
- Parker Hannifin Corporation
- Shuanglin Auto Parts Co., Ltd.
- IAC Group
- MAHLE
- Yanfeng Automotive Interiors
- Pierburg
- Aisin Seiki Co., Ltd.
- Tenneco
- Delphi Technologies
- BorgWarner
- GKN Automotive
- BOSCH
- Faurecia
The leading companies dominating the automotive purge valve market include Delphi Technologies, Standard Motor Products, ACDelco, Denso, and Robert Bosch GmbH known for their advanced emission control solutions. These companies are investing in electronic purge valve innovations, integrating smart sensors and onboard diagnostics for improved performance. With stringent global emission regulations, major automakers rely on these suppliers for high-efficiency EVAP systems. Additionally, the rise of hybrid and efficient vehicles is driving technological advancements and market expansion. Here are some leading players in the automotive purge valve market:
In the News
- In February 2024, Standard Motor Products, Inc. expanded its Emission Control program, which includes evaporative emission control (EVAP), exhaust gas recirculation (EGR), and positive crankcase ventilation. SMP offers over 3500 parts, including purge valves, vent hoses, solenoids, fuel vapour canisters, and leak detection pumps, covering all repair needs.
Author Credits: Saima Khursheed
- Report ID: 7313
- Published Date: Apr 08, 2025
- Report Format: PDF, PPT
